Outdoor Fun Rider Fitness Equipment
The Fun Rider station involves cardiovascular benefits using a rowing motion. This apparatus promotes strengthening the biceps, latissimus dorsi, and rear deltoids in the pulling motion, while also developing cardiovascular fitness.
Exercise levels can be of 5 to 15 minutes duration. Experiment with various speeds and different levels of intensity.
red, yellow, blue, green can be free
galvanized pipe, covered with powder
CE, EN1176, ISO, ROHS and so on
12 to 80
Amusement, public, Park, Sport playground,Community and School Amusement park
Training and enhance the muscle group strength of upper limbs,lower limbs and the waist muscle group;also strengthens the strength of heart and lung function.
cotton and PP Film
Port of export
10-15 working days up receipt of your deposit
30% in advance as deposit,70% balance before shipment
1 Innovative designs and bright color-matching.
2 Environmental-friendly and safe raw material.
3 Superior quality , reasonable price.
4 Adopt exported non-toxic , meet the EN1176 and ASTM1487 standards.
1) Designed to exercise every part of the body
2) Improves your balance, strength and flexibility
3) Strengthens your heart, lungs, waist and breathi
4) Suitable for middle age and old adults
A. Excavate a hole measuring 50*50*50 cms ( 1’ 7 3/4” ) as per the drawing.
B. First pour cement into the hole to form a cement layer of 100 mm. Installer should create a template based on the position of the holes on the equipment, then position the J-bolts with the do-it-yourself fixing mould and put the bolts into the hole. (Refer to the diagram below).
C. Pour concrete into the hole assuring that bolts are perpendicular to and 6.0 - 6.5 centimeters (2 1/2” ) above the ground surface. After pouring, double check the position of the anchor bolts against the actual positioning the equipment and make sure the concrete surface is very flat. Allow concrete to set for 24 hours prior to permenantly placing the equipment.
D. When the concrete is hardened; fasten the equipment to the J-bolts with 4 M18 nuts together with M18 spacers, as illustrated. After installation, check the perpendicularity of the equipment to ground surface with tolerance less than 1/100. Cover the Anchor bolts with plastic base dome.